Driveline specifications for the new Volvo FE

On this page, you find:
  • Engine range
  • I-Shift
  • I-Shift software packages
  • Manual gearboxes
  • Rear axles
  • Rear axle ratios
  • Power take-offs

Download all the equipment specifications (PDF)



Engine

D8K
No. of cylinders 6
Displacement 7.7 dm3
Stroke 135 mm
Bore 110 mm
Compression ratio 17.5:1
Economy revs 1000–1700 r/min
Exhaust braking effect (2800 r/min) 120 kW
Compression brake effect (2800 r/min) 170 kW
Oil filters 1
Oil change volume, incl. filter 25.5 l
Cooling system, total volume 17 l

Oil change interval
Up to 100,000 km, or once a year (Long haul): 75,000 km, or once a year (Distribution) using VDS4.

Fuel prerequisites
EN 590 (EU norm) max 10 ppm sulphur.
Engine-mounted power take-off
Ratio 1:1, 600 Nm torque output both when driving and standing still.


D8K – Power/torque

Engine D8K power and torque curves

Net output according to: EC 582/2011

D8K250 (184 kW)
Max power at 2100 r/min 250 hp
Max torque at 900–1700 r/min 950 Nm
D8K280 (206 kW)
Max power at 2100 r/min 280 hp
Max torque at 950–1700 r/min 1050 Nm
D8K320 (235 kW)
Max power at 2100 r/min 320 hp
Max torque at 1050–1600 r/min 1200 Nm

I-Shift


I-Shift is Volvo’s gearbox with automated gearchanging for all applications. Well known for fast gear shifting, it both increases driver comfort and reduces fuel consumption. Can be fitted with a power take-off or emergency power steering pump. For certain applications, an extra transmission oil cooler is available. I-Shift is manouevred from a stalk behind the steering wheel.




I-Shift software packages for the Volvo FE

Basic (TP-BAS)
The basic software designed to suit most transport demands.

Distribution & Construction (TP-DICON)
Improving performance in more challenging conditions, for example tight manouevring.

Fuel Economy (TP-FUEC) Designed to optimise the driving for best fuel economy.

I-Shift software packages

Functions TP-BAS TP-DICON TP-FUEC
Basic Shift Strategy
Performance Shift
Basic Gear Selection Adjustment
Gearbox Oil Temperature Monitor
Enhanced Shift Strategy
Launch Control
I-Roll
Kick-down inhibition/activation
Additional options
Enhanced PTO Functions
Enhanced Gear Selection Adjustment, including kick-down

Manual gearboxes

The manual gearboxes are operated with servo assistance. The short gear lever, which is placed on the tunnel, is vibration-free and gear lever movement is short and crisp. The automatic transmission is operated via push-buttons. All gearboxes can be specified with a power take-off.

Type Number of gears Max torque GCW approval D8K250 D8K280 D8K320
ZTO1109 Manual 9 1200 Nm 44 tonnes
AT2412E I-Shift 12 2400 Nm 44 tonnes
AL306 Automatic 6 1300 Nm 32 tonnes
AZTO1006 Manual 6 1050 Nm 32 tonnes  

Rear axles

Type Axle Gear Max torque Max axle load GCW approval
Single reduction
RSS1344C Solo Hypoid 2600 Nm 13 tonnes 44 tonnes
RTS2370A Tandem Hypoid 3550 Nm 23 tonnes 70 tonnes
Hub reduction
RSH1370F Solo Spiral bevel 3550 Nm 13 tonnes 70 tonnes
RTH2180C Tandem Hypoid 1200 Nm 21 tonnes 80 tonnes

Rear axle ratios

RSS1344C RTS2370A RSH1370F RTH2180C
2.64:1 3.09:1 3.76:1 2.96:1
2.85:1 3.40:1 4.12:1 3.08:1
3.08:1 3.78:1 4.55:1 3.22:1
3.36:1 4.13:1 4.67:1 3.36:1
3.70:1 4.50:1 5.41:1 3.52:1
4.11:1 5.14:1 6.18:1 3.70:1
4.63:1 5.67:1 7.21:1 3.89:1
5.29:1 6.17:1 4.12:1
6.17:1 4.35:1
4.62:1
4.82:1
5.12:1
5.43:1
5.86:1
6.31:1

Power take-offs

Name/Variant Gearbox Type Speed ratio Max torque (Nm) Rotation
PR-HP4T AL306 Pump con. 1:1.401 400 Same
PR-HF4TL AL306 Flange 1:1.139 400 Same
PR-HF6TH AL306 Flange 1:1.401 600 Same
PR-HP6TL AL306 Pump con. 1:1.139 600 Same
PTRD-D1D AT2412E Flange 1:1.300–1.650 550 Inverse
Pump con. 1:0.600–0.770 1000 Same
PTR-FH1 AT2412E/ ZTO1109 Flange 1:0.970 800 Inverse
PTR-PH1 AT2412E/ ZTO1109 Pump con. 1:0.970 800 Inverse
PTR-FH2 AT2412E/ ZTO1109 Flange 1:1.253 430 Same
PTR-PH2 AT2412E/ ZTO1109 Pump con. 1:1.253 430 Same
PTR-FH5 AT2412E/ ZTO1109 Flange 1:1.778 450 Same
PTR-PH4 AT2412E/ ZTO1109 Pump con. 1:1.778 450 Inverse
PTR-ZF4 ZTO1006 and ATO1056 Flange 1:1.700 320 Same
PTR-ZF5 ZTO1006 and ATO1056 Pump con. 1:1.700 320 Same
PTR-FH5 ZTO1006 and ATO1056 Flange 1:0.962 450 Same
PTR-PH4 ZTO1006 and ATO1056 Pump con. 1:0.962 450 Same
PTR-ZF2 ZTO1109 Flange 1:1.900 410 Same
PTR-ZF3 ZTO1109 Pump con. 1:1.900 410 Same
PTRA-PH1 ZTO1109 Pump con. 1:0.970 600 Inverse
PTRA-PH2 ZTO1109 Pump con. 1:1.253 430 Same